Specifies the overlap resolving algorithm to be applied to axis labels.
It is recommended that you set the overlappingBehavior configuration property because labels may overlap when resizing the parent window, or when rotating the device that displays the chart.
When labels overlap, you can specify how these labels will be displayed by setting the overlappingBehavior property to one of the following values:
Leave the labels overlapped.
Arrange labels in a staggered manner. The spacing between label rows will be 5 pixels.
Rotate labels so that they are perpendicular to the axis.
Leave the labels as they are, but enlarge the axis tick intervals so that the labels do not overlap.
To set the custom spacing between staggered rows or the custom rotation angle for the 'stagger' and 'rotate' modes, assign an object to the overlappingBehavior configuration property. Set the object's mode property to the required mode, and set the staggeringSpacing or rotationAngle property to the required value.
Specifies the overlap resolving algorithm to be applied to series point labels.
Use this property in the following cases:
- When you use the 'stagger' algorithm and set the custom spacing between staggered rows. In this instance, set the mode property to 'stagger' and set the staggeringSpacing property to the required value.
- When you use the 'rotate' algorithm and set a custom rotation angle. In this instance, set the mode property to 'rotate' and set the rotationAngle property to the required angle
Otherwise, it is easier to set the overlappingBehavior configuration property to the required mode directly.
Specifies the angle used to rotate axis labels to resolve overlap.
Specifies the spacing that must be set between staggered rows when the 'stagger' algorithm is applied to resolve label overlap.