Vue PolarChart Props

When adapting to small container size, the widget may hide its accessory elements, thus saving space for more valuable ones. The elements are being hidden in the following sequence.

1. Title
2. Export menu icon
3. Legend
4. Argument axis labels
5. Point labels (can be saved by setting the adaptiveLayout.keepLabels option to true)

To specify the widget's size small enough for the layout to begin adapting, use the height and width options of the adaptiveLayout object.

View Demo on JSFiddle

The widget animate its elements at the beginning of its lifetime and when the data source changes.

For charting, the polar coordinate system is used to determine each point uniquely on a plane through two numbers, the argument and the value of the point. A circular and straight lines (the axis of arguments and the axis of values) are specified to define the coordinates. To define the argument axis, use the argumentAxis configuration object. To define the value axis, use the valueAxis configuration object. To set the properties of all axes to a common value, use the commonAxisSettings configuration object. This object exposes the properties that can be specified for all axes simultaneously. Note that the value specified for an axis individually (in the argumentAxis or valueAxis object) overrides the value specified in the commonAxisSettings object.

This option accepts a value from 0 to 1 that specifies the correlation between the empty space on a bar group's sides and the group's angular width: 0 - the bar group occupies the whole allocated sector; 1 - virtually hides the bar group leaving the whole sector empty.

See Also

• Specify the Bar Width
• barPadding

See Also

• Specify the Bar Width
• barWidth

Works only if the equalBarWidth option is set to true.

Use this object's properties to set the options for all chart axes at once. The option values will be applied to the argument axis and all values axes, which are defined in the valueAxis array. To set a common axis option for an axis individually, use the corresponding valueAxis or argumentAxis object. Values that are set individually override their corresponding common values.

Use this object's properties to set options for all chart series at once. These can be options common to all series types and options specific to series types.

If you have several series of one type, you can set options to the values specific to this series type using the corresponding object (area, line or another) within the commonSeriesSettings configuration object. The values that are set within type-specific configuration objects override the corresponding common values.

In case you have to set an option for an individual series, use the corresponding series object within the series array. The values that are set individually override the corresponding common values.

If you set this property to the color of the parent page element, certain chart elements will use this color to coordinate with the page. For example, hovered points in the PolarChart widget are painted in the color that is set to this property, but you can change this color to a custom color (see color).

All point labels in a chart are identical by default, but you can specify a unique appearance for individual labels using the customizeLabel function. This function should return an object with options that will be changed for a certain label. See the label object for information about all options available for changing.

The customizeLabel function accepts an object providing information about the series point that the label belongs to. This object contains the following fields.

By default, all series points in a chart are identical, but you can specify a unique appearance for individual points using the customizePoint function. This function should return an object with options that will be changed for a certain point. See the point object for information about all options available for changing.

The customizePoint function accepts an object providing information about the series point. This object contains the following fields.

When values from a data source are of a different type, they may be displayed incorrectly on a chart. To resolve this situation, use the options provided by the dataPrepareSettings configuration object. You can enable/disable data validation using the checkTypeForAllData option, or specify whether or not to convert the data source values to the type of the axis using the convertToAxisDataType option. In addition, you can sort the series points using the sortingMethod option.

This option accepts one of the following:

• Array of objects
  A simple JavaScript array containing a collection of plain objects. See demo.

• URL
  The URL of a JSON file or service that returns JSON data. See demo.

• DataSource or its configuration object
  A DataSource is an object that provides an API for data processing. Learn more about it from the Data Layer and DataSource Examples guides. See demo.

  NOTE

  Turn the DataSource's pagination off to prevent data from partitioning.

See Also

• argumentField | valueField
• getDataSource()

If some values for a series are set to zero or not specified, bars that represent these values will be missing from the chart. To fill the empty area by extending the angle of the neighboring bars, set the equalBarWidth property to false. The bars will have different angles, but there will be no empty areas.

To set a custom angle for bars, as well as the spacing between bars, use the barWidth option.

If the widget's container is not large enough to contain bars of the specified width along with the specified spacing between them, the spacing will be ignored.

These features allow a user to export your widget into a document or print it. When exporting is enabled, the "Exporting/Printing" button appears in the widget. A click on it invokes a drop-down menu that lists exporting and printing commands. The following formats are supported for exporting into: PNG, PDF, JPEG, SVG and GIF.

See Also

• exportTo(fileName, format)
• print()
• DevExpress.viz.exportFromMarkup(markup, options)

Watch Video

The PolarChart widget can include a legend - an explanatory component that helps you identify a series. Each series is represented by an item on a Legend. An item marker identifies the series color. An item label displays the series title. To set the required position for a legend and its items, to customize the font settings for item labels, and to specify the size of item markers, use the properties of the legend configuration object. To learn more on the legend and its options, refer to the Legend topic.

When the widget visualizes local data, loading is instant. But when the widget is bound to a remote data source, loading may takes a considerable amount of time. To keep the viewer's attention, the widget can display a loading indicator.

To activate the loading indicator, assign true to the loadingIndicator.show option. Once data is loaded, the loading indicator will be hidden automatically.

See Also

• showLoadingIndicator()
• hideLoadingIndicator()

Oftentimes, series data contains negative values. Visualizing such data using stacked-like series may lead to unexpected results. To prevent situations of this kind, assign true to the negativesAsZeroes option, and the widget will count all negative values as zeroes.

See Also

• getAllSeries()
• getSeriesByName(seriesName)
• getSeriesByPos(seriesIndex)

See Also

• onExporting
• onFileSaving

See Also

• onExported
• onFileSaving

See Also

• onExporting
• onExported

The widget notifies you of errors and warnings by passing messages to the browser console. Each message contains the incident's ID, a brief description, and a link to the Errors and Warnings section where further information about this incident can be found.

The onIncidentOccurred function allows you to handle errors and warnings the way you require. The object passed to it contains the target field. This field provides information about the occurred incident and contains the following properties:

• id
  The incident's ID. The full list of IDs can be found in the Errors and Warnings section.
• type
  The incident's type: "error" or "warning".
• args
  The argument of the incident's message. Depends on the incident. For example, it may be the name of the data source field that was specified incorrectly, or the name of the option that was not set properly.
• text
  The text passed to the browser's console. Includes the args content, if there is any.
• widget
  The name of the widget that produced the error or warning.
• version
  The used DevExtreme version.

You cannot access widget elements in this function because it is executed before they are ready. Use the onDrawn function instead.

$(function () {
    $("#polarChartContainer").dxPolarChart({
        // ...
        onPointClick: function (e) {
            e.event.cancel = true;
        }
    });
});

import { DxPolarChartModule } from "devextreme-angular";
// ...
export class AppComponent {
    polarChart_onPointClick (e) {
        e.event.cancel = true;
    }
}
@NgModule({
    imports: [
        // ...
        DxPolarChartModule
    ],
    // ...
})

<dx-polar-chart ...
    (onPointClick)="polarChart_onPointClick($event)">
</dx-polar-chart>

Bar Chart Demo

To identify whether the pointer has entered or left the series point, call the point's isHovered() method.

To identify whether the selection has been applied or canceled, call the point's isSelected() method.

To identify whether the pointer has entered or left the series, call the series' isHovered() method.

To identify whether the selection has been applied or canceled, call the series' isSelected() method.

See Also

• hideTooltip()
• Point.hideTooltip()

See Also

• Point.showTooltip()

This option accepts either the name of a predefined palette or an array of colors. The array can include the following colors:

• Hexadecimal colors
• RGB colors
• RGBA colors
• Predefined/cross-browser color names
• Predefined SVG colors

Use the VizPalette enum to specify this option when the widget is used as an ASP.NET MVC Control. This enum accepts the following values: Default, SoftPastel, HarmonyLight, Pastel, Bright, Soft, Ocean, Vintage, Violet, Carmine, DarkMoon, SoftBlue, DarkViolet, and GreenMist.

See Also

• Palettes
• paletteExtensionMode
• series.color

The following variants are available:

• "blend"
  Create a blend of two neighboring colors and insert it between these colors in the palette.

• "alternate"
  Repeat the full set of palette colors, alternating their normal, lightened, and darkened shades in that order.

• "extrapolate"
  Repeat the full set of palette colors, changing their shade gradually from dark to light.

If you place the widget on a page that uses a tag modifying the path (<base>, <iframe>, etc.), some of the widget elements may get mixed up or disappear. To solve this problem, set the pathModified option to true.

See Also

• DevExpress.viz.refreshPaths()

To set the points to highlight along with the selected point, set the series.point.selectionMode option.

To learn how to select a point, refer to the Selection Handling topic.

Use the ChartElementSelectionMode enum to specify this option when the widget is used as an ASP.NET MVC Control. This enum accepts the following values: Single and Multiple.

Multiple Point Selection Demo API - Select a Point Demo

When this option is set to true, the widget will be redrawn automatically in case the size of its parent window changes.

Series point labels display series point values. If your chart contains several series with a large number of points in each, point labels may overlap. In this case, specify how the chart must resolve overlapping using the resolveLabelOverlapping option. To hide certain labels, set this option to 'hide'. Labels to be hidden will be determined automatically.

Use the PolarChartResolveLabelOverlapping enum to specify this option when the widget is used as an ASP.NET MVC Control. This enum accepts the following values: None and Hide.

When this option is set to true, the widget text flows from right to left, and the layout of elements is reversed. To switch the entire application/site to the right-to-left representation, assign true to the rtlEnabled field of the object passed to the DevExpress.config(config) method.

DevExpress.config({
    rtlEnabled: true
});

A series represents a grouping of related data points. The most important characteristic of a series is its type, which determines a particular visual representation of data. You can find more details on each series type in the corresponding topics in the Series help section.

To define a single series, assign an object defining the series to the series configuration object. In the series' object, specify the series type, data source fields, the appearance of the series points and other options.

To show several series, specify series as an array of objects defining series. If you need to set similar values to properties of several series, use the commonSeriesSettings configuration object. It exposes the properties that can be specified for all series at once and for all series of a particular type at once. Note that the values specified for a series individually (in the series array) override the values that are specified for all series (in the commonSeriesSettings object).

To set the series elements to highlight when a series is selected, set the series selectionMode option.

To learn how to select a point, refer to the Selection Handling topic.

Use the ChartElementSelectionMode enum to specify this option when the widget is used as an ASP.NET MVC Control. This enum accepts the following values: Single and Multiple.

In most cases, you can organize the array that is assigned to the chart's dataSource option in the following way.

[
    {arg: arg1Value, series1Value: val11, series2Value: val12, ...}
    {arg: arg2Value, series1Value: val21, series2Value: val22, ...}
    ...
    {arg: argNValue, series1Value: valN1, series2Value: valN2, ...}
]

Each object that is included in the array represents an argument value and the values of all series for this argument.

However, there are some scenarios in which you do not know exactly how many series will be added. In these cases, you will not be able to define the data source in the manner detailed above. Instead, define it in the following way.

[
    {seriesName: series1, arg: arg11Value, val: value11 }
    {seriesName: series1, arg: arg12Value, val: value12 }
    ...
    {seriesName: seriesM, arg: argM1Value, val: valueM1 }
    {seriesName: seriesM, arg: argM2Value, val: valueM2 }
    ...
]

If you define a data source in this manner, set the argument and value fields using the argumentField and valueField properties of the commonSeriesSettings configuration object (for all series at once). Then, define a template for the series using the seriesTemplate configuration object. Within this object, set the data source field that specifies the series name to the nameField option.

If you need to specify individual values for options of a particular series, assign a callback function to the customizeSeries option of the seriesTemplate object.

The widget occupies its container's entire area by default. Use the size object to specify the widget's size if it should be different from that of its container. Assign 0 to size object's height and width options to hide the widget.

A theme is a widget configuration that gives the widget a distinctive appearance. Use can use one of the predefined themes or create a custom one. Changing the option values in the widget's configuration object overrides the theme's corresponding values.

Use the VizTheme enum to specify this option when the widget is used as an ASP.NET MVC Control. This enum accepts the following values: GenericLight, GenericDark, GenericContrast, GenericCarmine, GenericDarkMoon, GenericSoftBlue, GenericDarkViolet, GenericGreenMist, IOS7Default, MaterialBlueLight, MaterialLimeLight, MaterialOrangeLight, MaterialPurpleLight, MaterialTealLight.

The widget's title is a short text that usually indicates what is visualized. If you need to specify the title's text only, assign it directly to the title option. Otherwise, set this option to an object with the text and other fields specified.

The title can be accompanied by a subtitle elaborating on the visualized subject using the title.subtitle object.

A tooltip is a miniature rectangle displaying values of a series point. A tooltip appears when the end-user hovers the cursor over a series point. You can enable/disable tooltips, change their appearance and format their text using fields of the tooltip configuration object.

In a polar coordinate system, the argument axis is a circle because it tracks a continuous angle change. When the argument in the chart's data source is discrete, you may want to display the argument axis as a discrete axis. For this purpose, set the useSpiderWeb option to true. In this instance, the argument axis, as well as the value axis' grid lines, will be displayed by straight lines between axis ticks/grid lines.

The spider web option is supported in the following series types.

• line
• area
• scatter

View Demo

For charting, the polar coordinate system is used to determine each point uniquely on a plane through two numbers, the argument and the value of the point. A circular and straight lines (the axis of arguments and the axis of values) are specified to define the coordinates. To define the argument axis, use the argumentAxis configuration object. To define the value axis, use the valueAxis configuration object.

To set the properties of all axes to a common value, use the commonAxisSettings configuration object. It exposes properties that can be specified for all axes simultaneously. Note that the value specified for an axis individually (in the argumentAxis or valueAxis object) overrides the value that specified in the commonAxisSettings object.